Fire Hose Reels in insulated/heated cabinet

Fire hydrantHW-52 N-KP-15/20 HS

Type: HW-52
Symbol: HW-52 N-KP-15/20 HS
Product description:
Model KP – surface-mounted hydrant with space for 6 kg powder extinguisher
Surface-mounted - N
Note: hydrant is not resistant to direct effect of external conditions and must be installed under a roofing
Hydrant adapted to operation at low temperatures below -25 C
Universal model – supply can be connected from the right or left
Internal hydrant for flat-folded hose DN52 (fire press hose)
Hydrant cabinet material - steel DC01 1.0 mm thick
Paint coating 80 μm thick – polyester powder paint for external and industrial uses resistant to UV radiation
Warmed interior – cabinet warmed with insulation material with heat transfer coefficient 0.042 W/mk and fitted with a 150W heater. Automatic heat adjustment.
Protection level of heating element: IP65. Supply: 230V/50Hz
Anti-corrosion protection – zinc coating at least 3μm per side; polyester paint for external and industrial uses
Design (optional):
Cabinet body of stainless (alloy) steel 0H18N9 (AISI 304)
Cabinet body made of stainless (alloy) steel 0H17N12M2T (AISI 316)
Branch pipe PW-52 as per PN-89/M-51028
Complete 180° tilting reel
Hydrant valve DN 50 with 52-T cap
Flat-folded press fire hose H-52 as per PN-87/M-51151 - 15 mb or 20 mb
Equipment (optional):
6kg Powder extinguisher
Safety mark – internal hydrant PN-EN ISO 7010-2012
Operation manual
Manufacturer’s data
Rating plate
Water supply installation:
Cabinet body prepared for installation of hydrant valve on the left or right (universal design)
Compliance with standards:
EN 671-2
Type of door:
Full door
Full door with a hinge in the front plate allowing to open at 180°, according to EN 671-2
Type of lock:
Special fastener drawing the door to the cabinet body seal
RAL3000 (red) – polyester paint resistant to UV radiation - standard
RAL9010 (white) - polyester paint resistant to UV radiation - standard
Reel colors:
RAL3000 (red) wg EN 671-2

Q Nom = 150l/min at:

  • P ≥ 0.2 MPa – WSP K = 110 nozzle D13 mm
  • P ≥ 0.4 MPa – WSP K = 83 nozzle D12 mm
  • P ≥ 0.6 MPa – WSP K = 49 nozzle D9 mm
Work pressure:
Minimum : 0.2 MPa
Maximum : 0.7 MPa
Width [mm]
Height [mm]
Depth [mm]
Reel diameter [mm]
Hose length [m]
HW-52 N-KP-15 HS
HW-52 N-KP-20 HS