Fire Hose Reels in insulated/heated cabinet

Fire hydrantHW-19 N/W-20/30 HS

Type: HW-19
Symbol: HW-19 N/W-20/30 HS
Product description:
Surface-mounted N and recess-mounted W (frame – optional elements are required)
Note: hydrant is not resistant to direct effect of external conditions and must be installed under a roofing
Embedded installation can be done with an optional concealing element – body structure allows for a smooth and simple installation of concealing elements delivered in 4 parts. Any wall unevenness can be removed with adjustment holes.
Hydrant adapted to operation at low temperatures below -25 C
Universal model – supply can be connected from the right or left
Internal hydrant for semi rigid fire hose DN19
Material of hydrant cabinet – electrolyte galvanized steel DC01 (zinc coating thickness min. 3μm per side)
Paint coating 80 μm thick – polyester powder paint for external and industrial uses resistant to UV radiation
Warmed interior – cabinet warmed with insulation material with heat transfer coefficient 0.042 W/mk and fitted with a 200W heater. Automatic heat adjustment.
Protection level of heating element: IP65. Supply: 230V/50Hz
Anti-corrosion protection – zinc coating at least 3μm per side; polyester paint for external and industrial uses
Design (optional):
Cabinet body of stainless (alloy) steel 0H18N9 (AISI 304)
Cabinet body made of stainless (alloy) steel 0H17N12M2T (AISI 316)
Branch pipe PW-19/D7
Complete 180° tilting reel fitted with water axle to extend a hose under water stream over the required length
DN25 valve
Half-rigid hose DN19 per EN-694 - 20 mb or 30 mb
Equipment (optional):
Cabinet body and door adapted for hanging seal
Adjusted bases of hydrant cabinet
Safety mark – internal hydrant PN-EN ISO 7010-2012
Certificate no.
Operation manual
Manufacturer’s data
Rating plate
Water supply installation:
Cabinet body prepared for installation of hydrant valve on the left or right (universal design)
Compliance with standards:
EN 671-1
Type of door:
Full door
GRAS HINGE SYSTEM – opening of the right or the left door; change of opening direction by the user
Door hinge allowing to open at 180°, according to EN 671-1
Type of lock:
Key lock with a spare key placed on the door plate behind a 1 mm glass window;
RAL3000 (red) – polyester paint resistant to UV radiation - standard
RAL9010 (white) - polyester paint resistant to UV radiation - standard
Others – all colors available from RAL pallet and special colors - option
Reel colors:
RAL3000 (red) wg EN 671-1
Work pressure:
Minimum : 0.2 MPa
Maximum : 1.2 MPa
Width [mm]
Height [mm]
Depth [mm]
Reel diameter [mm]
Hose length [m]
Weight [kg]
HW-19 N-20 HS
HW-19 N-30 HS