Hydrant is resistant to direct effect of outdoor conditions according to EN 13724
Hydrant adapted to operation at low temperatures below -25 C
Universal model – supply can be connected from the right or left
Recess-mounted (embedded) W
Outdoor hydrant for semi rigid fire hose DN25
Design:
Material of hydrant cabinet – electrolyte galvanized steel DC01 (zinc coating thickness min. 3μm per side)
Paint coating 80 μm thick – polyester powder paint for external and industrial uses resistant to UV radiation
Warmed interior – cabinet warmed with insulation material with heat transfer coefficient 0.042 W/mk and fitted with a 200W heater. Automatic heat adjustment.
Protection level of heating element: IP65. Supply: 230V/50Hz
Anti-corrosion protection – zinc coating at least 3μm per side; polyester paint for external and industrial uses
Design (optional):
Cabinet body of stainless (alloy) steel 0H18N9 (AISI 304)
Cabinet body made of stainless (alloy) steel 0H17N12M2T (AISI 316)
Equipment:
Branch pipe PW-25 as per EN 671-1
Complete 180° tilting reel fitted with water axle to extend a hose under water stream over the required length
DN25 valve
Half-rigid hose DN25 - 30 meters
Equipment (optional):
Cabinet body and door adapted for hanging seal
Designations:
Safety mark – internal hydrant PN-EN ISO 7010-2012
Certificate no.
Operation manual
Manufacturer’s data
Rating plate
Water supply installation:
Cabinet body prepared for installation of hydrant valve on the left or right (universal design)
Compliance with standards:
EN 671-2
Type of door:
Full door
Door hinge allowing to open at 180°, according to EN 671-1
Type of lock:
Key lock with a spare key placed on the door plate behind a 1 mm glass window;
Color:
RAL3000 (red) – polyester paint resistant to UV radiation - standard
RAL9010 (white) - polyester paint resistant to UV radiation - standard
Others – all colors available from RAL pallet and special colors - option
